Change a Battery in an iPod Nano

As with a lot of other moveable electronics, the batteries in the ipod Nano are possibly lithium polymer or lithium ion. And as with all batteries, sooner or later they will have on out. How prolonged your ipod Nano battery will very last is dependent on the standard have on and range of total recharges it has had.

Items You may Will need

Battery alternative kit

Acquire a battery kit. Ample kits and alternative batteries can be located on on the web merchants these as www.kokopellimusic.us and amount in price tag from all around $fifteen to $twenty five. These kinds of kits will incorporate all the instruments and recommendations needed for battery substitute.

Flip the ipod Nano off and slide the "Maintain" change, identified on top rated of the Nano, into the Maintain placement, marked in red. Touch any metal all around you to ground by yourself and discharge any static electrical power.

Insert the flat-bladed instrument (it really should glimpse equivalent to a screwdriver, but manufactured of plastic) from the battery kit involving the metal back again and the acrylic lip on the facet of the Nano, developing a room just significant sufficient to insert the other instrument with a similarly formed head.

Have on the other device to operate all around the edge of the Nano. As you make your way close to, the back again will separate from the front.

Flip the Nano more than so that the back again is face up and gently eliminate the back again cover.

Reduce the wire for the aged battery with a pair of scissors and eliminate it. Make certain to Reduce the wires all around the battery to give you area from any mistakes that might happen later on in the procedure.

Put on a wire stripper to strip off one/two inch of insulation from the wires on the substitute battery. The substitute battery wires really should have all around three/4 inch of uncovered wire; they usually are offered with close to one/4 inch currently uncovered. You may Will need to expose the remainder manually.

Strip one/two inch off every of the 3 wires coming from the Nano.

Place the new battery into the Nano.

Match and attach the 3 wires from the Nano with the 3 wires from the new battery. They can be matched by colour and connected by twisting them collectively with your fingers or tweezers.

Cover all uncovered locations on the wires with scotch tape. Make certain all uncovered wire is totally covered.

Place the wires flat on the main board.

Align the case cautiously and snap it closed.

Charge new battery totally ahead of you wear the Nano once again.