You can consider your ipod Nano apart with a few of easy equipment and treatment whilst dealing with it. Familiarize your self with the elements of your ipod Nano prior to you start disassembly.
Issues You will Require
- Flat-head screwdriver or putty knife Phillips screwdriver (dimension 00)
Open the case by utilizing a flat-head screwdriver or putty knife. Your ipod Nano ought to be dealing with up. Location the flat screwdriver in between the leading plastic case and metal bottom case, gently prying all the way about the ipod Nano till the bottom case arrives off. The bottom metal case does not have any wires linked, so it can effortlessly be taken out.
Take away the battery by gently prying it with a flat screwdriver. It can be only held in Spot by adhesive, so it need to dislodge simply. It can be linked to the logic board by means of soldered wires. Consider treatment not to pull the wires loose.
Take away the logic board by taking away the 4 screws. A few screws are found in the vicinity of the headphone jack and sync port; the fourth screw is toward the center of the board. The screws will be coated with possibly tape or a sticker. Use a modest-sized Phillips screwdriver. Soon after taking away the screws, very carefully raise up the logic board--taking treatment not to disrupt the connections positioned on the underside of the logic board.
Get rid of the front case from the logic board by eliminating the click on wheel cable. The cable is connected to the logic board by means of a connector. By flipping up the black piece on the opposite side of wherever the cable is heading into the logic board, You are going to unlock the connector. This will let you to pull the cable out, and you can then Eliminate the front case from the logic board.
Disconnect the LCD by flipping the black locking mechanism and gently pulling the cable out.
No comments:
Post a Comment