Ipod screens are quickly cracked or scratched if not dealt with very carefully or saved in a protective case. For ipod Nano entrepreneurs who Will need to save time and income by employing their individual ipod restore instrument kits, correcting an ipod Nano screen can be a quick and effortless approach. Correcting the ipod screen also saves the operator the headache of getting a brand name-new ipod.
Items You may Will need
- Modest Philips screwdriver Nylon instrument Modest flat-head screwdriver, knife or T-six Star Driver
Insert the nylon instrument into the groove found on the prolonged facet of the ipod. Slide it along the edge of equally sides right up until you are capable to separate equally plates.
Put aside the back again plate. Very carefully raise the battery from its slot to entry the screws beneath (do not minimize the battery wires if you are not changing the battery). Peel back again the protective movie covering the major board and use the Philips screwdriver to get rid of the 3 Modest screws surrounding the major board.
Use the flat-head screwdriver to pry open the major board around one/4 inch. Separate the screen from the principal board by relocating the keeping clips away from the board.
Slide the screen out so that a portion is sticking out the best of the ipod. Flip the ipod on its back again and eliminate the faceplate. Consider out the ipod screen by flipping up the black tab keeping down the ribbon cable connector. Consider out the current connector and change it with the new screen ribbon by locking down the black tab.
Insert the new ipod screen by putting it on the principal board. Spot the major board back again into the ipod plate and substitute the 3 screws to lock it in Location. Put the battery back again into its authentic place.
Verify to make positive that the plate's metal tabs are pushed down. Slide the ipod's maintain button so that it is aligned with the plate's grooves. Shut equally plates with each other.
No comments:
Post a Comment