The fourth era ipod Nano is a moveable, compact and hugely innovative media player. Disassembling it makes it possible for you to exchange a failed battery or resolve a loose headphone plug, but it won't be able to be taken apart as carefully as other versions due to the fact of the way the electronics are soldered jointly. All you will need is a single instrument acquired from an ipod offer keep. The technique is not challenging, but any guarantee that is in result will be violated.
Items You may Want
- Soft cloth ipod opening device Phillips jeweler's screwdriver Flat-edged jeweler's screwdriver
Area a soft cloth on a table. Lock the ability change. Spot the Nano experience down on the cloth, with the LCD display screen farthest from you.
Insert the opening instrument into the top rated of the Nano involving the case and the bezel. Pull the best bezel off the best of the tool.
Repeat this method on the bottom and take away the bottom bezel.
Get rid of the two screws that are now uncovered on the bottom with the Phillips screwdriver. Insert the suggestion of the flat-edged screwdriver among the dock module in the bottom and the facet of the Nano.
Raise up on the suggestion to loosen the dock module. Pull the module out of the bottom. Get rid of the screw that is now unveiled at the bottom.
Push the circuit board halfway out of the Nano's case from the bottom with the suggestion of a screwdriver.
Push the LCD panel and the glass in front of it out of the Nano's case.
Get to inside of the case and grab the cable connected to the click on wheel module. Pull the cable's plug off the circuit board.
Pull the circuit board out of the case. Spot the circuit board on the soft cloth with the electronics going through up.
Slide the "Maintain" change tab gently off the top rated conclude of the circuit board. Push the click on wheel module out of the case.
No comments:
Post a Comment